Hot Products
APView500 Power Qualtiy Monitor Analyzer
4 channels of AC voltage, 4 channels of AC current
Power quality monitor APView500 integrates a high-performance multi-core platform and an embedded operating system, and monitors power quality indexes stipulated in IEC61000-4-30 Testing and measurement techniques –Power quality measurement methods, and provides various functions such as harmonic analysis, waveform sampling, voltage dips/swells/interruptions monitoring, flicker monitoring , voltage unbalance monitoring, event recording and measurement control. It meets IEC 61000-4-30 Class A Edition 3.1 with respect to standardization of power quality index measurement methods, measurement accuracy of index parameters, clock synchronization, event alarms and others and satisfy the demands of power quality monitoring of power supply system up to 110kV. Therefore, it is widely applicable for power quality monitoring in chemical industry, steel industry, metallurgy industry, hospitals, data centers, transportation, construction industry and other industries.
 |
Main Feature
● High-performance hardware platform
● Various interfaces available
● 4 channels of AC voltage, 4 channels of AC current
● 5 DO, 5 DI, 5-inch color LCD screen
● 2 RS485 interfaces supporting the Modbus RTU protocol and the IRIG-B protocol
● 2 Ethernet interfaces supporting Modbus TCP, IEC 61850 MMS, FTP and device upgrade
● 1 USB port for device upgrades
● Continuous and comprehensive self-test function
● Good anti-interference capacity
Parameter
|
Communication RS485 (Modbus-RTU Modbus-TCP、IEC61850 MMS、FTP) Rated: AC current 5A or 1A
|
 |
 |
AC voltage Rated: 57.74V/100V, or 220V/380V Measuring range: 0-1.2Un Power consumption:≤0.5VA (single phase) Overload capacity: 1.2Un, continuous working 4 times for 1seconds |
|
Technical Parameter |
Value |
|
Rated Value |
AC voltage:AC/DC220V, AC/DC110V or DC48V AC current:AC1A,5A; |
|
Overload capacity |
1.2In, continuous working 20 times for 1 second
|
|
power supply |
Rated: AC/DC220, AC/DC110V or DC48V Permissible deviation: -20%-+20% Power consumption:≤15W |
|
Power Consumption |
≤0.5VA (single phase) |
| Measuring rage | 0-1.2In |
| Digital output |
Mechanical service life: ≥10000 Output mode: Passive contacts Switching capacity: ≤4000W or ≤384VA On-state current: ≥16A(AC250V/DC24V) in the continuous mode; ≥30A for a short term (200ms) |
|
Accuracy |
Class 0.5 |
|
RMS Voltage：±0.1% RMS Current：±0.1% P,Q,S：±0.2% Power factor：Class 0.5 Voltage deviation：0.1% Frequency deviation：±0.001Hz
|
|
|
Communication |
RS485,Modbus-RTU protocol;Ethernet.
|
|
Three phase unbalance |
Voltage unbalance:±0.15% Current unbalance:±1% |
|
Power frequency withstand voltage |
Between power supply set of terminals and signal input,output set of terminals 2kV/1min (RMS) Between the shell and all set of terminals(except the set of terminals reference voltage less than 40V) AC 4kV |
|
Temperature |
Operation: -10℃～+55℃Storage: -30℃-+80℃ |
|
Humidity |
≤95%RH,no condensation,without corrosive gas |
|
Altitude |
≤ 2500m |
Dimension
 |
 |
Wiring
Network
Installation
Acrel ADW600 Multi Channels Smart 3 Phase Energy Meter
Optional 4DI2DO,12 channels temp measure,4 channels Residual current monitoring
AM6 Prefabricated Substation Protection & Control Device
2 × 4–20 mA DC measurement channels and 3 temperature measurement channels
ATU Intelligent Monitoring Terminal for Switchgear
Conduct centralized monitoring and management.
AMC300L Base Station AC Multi-loop Intelligent Power Collection and Monitoring Device
6 channel 3 phase or 18 channel 1 phase
Acrel ADW600 Multi Channels Smart 3 Phase Energy Meter
With Different Size of CTs,easy to install D10,D16,D24,D36
Acrel ADW600 Multi Channels Smart 3 Phase Energy Meter
Optional 4DI2DO,12 channels temp measure,4 channels Residual current monitoring
AM6 Prefabricated Substation Protection & Control Device
2 × 4–20 mA DC measurement channels and 3 temperature measurement channels
ATU Intelligent Monitoring Terminal for Switchgear
Conduct centralized monitoring and management.
AMC300L Base Station AC Multi-loop Intelligent Power Collection and Monitoring Device
6 channel 3 phase or 18 channel 1 phase
Acrel ADW600 Multi Channels Smart 3 Phase Energy Meter
With Different Size of CTs,easy to install D10,D16,D24,D36
Acrel ADW600 Multi Channels Smart 3 Phase Energy Meter
Optional 4DI2DO,12 channels temp measure,4 channels Residual current monitoring
AM6 Prefabricated Substation Protection & Control Device
2 × 4–20 mA DC measurement channels and 3 temperature measurement channels
ATU Intelligent Monitoring Terminal for Switchgear
Conduct centralized monitoring and management.
Inquiry
If you have any suggestions or question for us.Please contact us